Osmo Oils

Osmo UV-Protection Oil is a satin matt Oak stain finish for exterior wood especially recommended for vertical surfaces such as select solid oak doors, windows, timber cladding, fences, pergolas, etc. This product is micro-porous, thus allowing the wood to breathe. Because the oil does not form a seal on the surface of the wood it cannot peel, flake, crack or blister. Whilst transparent, this oil does have a tint to it and is designed to give as finish the same colour as oak and penetrates into the wood grain aiding the natural elasticity of the wood and helping to reduce shrinkage and swelling.

The complete finish blocks the greying process by a UV-Protection Factor of 12 in comparison to untreated wood and reduces shrinking and swelling of the wood.  Containing active ingredients which protect from mould, algae and fungal attack, it is easy to apply as it does not dry during application, does not require a primer and can be renewed without the need for sanding. This oil prolongs the renovation time significantly when used as a top coat for staining wood

1 Litre covers approximately 16-20m2 on smooth wood - stripped and rough sawn will require more material. 

Preparation

Ensure surfaces are clean and dry before application and are not previously sealed.

Application

Apply in THIN coats with paint brush or mohair roller. Always finish your brush or roller strokes by going in the direction of the wood grain.

Osmo recommend that this product is NOT used on horizontal surfaces eg floors and Decking. It is also NOT suitable for external veneer doors. 

This Osmo Wood Wax Finish in clear is the ultimate choice for finishing all types of wooden internal doors. This clear wood wax is a transparent oil. Allowing the natural grain of the wood to remain visible, this Osmo oil is made to protect any internal timber products.

Ensure your wooden surface is clean, dry and free from frost. There is no need to thin this product, it is ready to use. Simple stir well before use. You can thinly apply this oil with a brush, a roller or a lint free rag. Remember to test a corner of the surface before applying the oil all over. Apply 1 - 2 coats of oil. Approx. coverage: 24m²/L with one coat. Drying time: 24hrs.

Osmo UV-Protection Oil is a matt clear finish for exterior wood especially recommended for vertical surfaces such as solid oak doors, windows, timber cladding, fences, pergolas, etc. This product is micro-porous, thus allowing the wood to breathe. Because the oil does not form a seal on the surface of the wood it cannot peel, flake, crack or blister. It is based on natural oils and offers a very clear, natural effect when compared to other 'clear' oils and penetrates into the wood grain aiding the natural elasticity of the wood and helping to reduce shrinkage and swelling.

The complete finish blocks the greying process by a UV-Protection Factor of 12 in comparison to untreated wood and reduces shrinking and swelling of the wood. Containing active ingredients which protect from mould, algae and fungal attack, it is easy to apply as it does not dry during application, does not require a primer and can be renewed without the need for sanding. This oil prolongs the renovation time significantly when used as a top coat for staining wood

1 Litre covers approximately 16-20m2 on smooth wood - stripped and rough sawn will require more material.

Preparation

Ensure surfaces are clean and dry before application and are not previously sealed.

Please check your external door manufacturer's guide for their recommended products. This product is not suitable for external veneer doors.

Application

Apply in THIN coats with paint brush or mohair roller. Always finish your brush or roller strokes by going in the direction of the wood grain.

Osmo recommend that this product is NOT used on horizontal surfaces eg floors and Decking

Osmo Polyx Oil White Tint is a great treatment for internal solid oak doors, wooden flooring and furniture. With a proven reputation, Osmo oils provide the highest level of protection and wood appearance enhancement. Osmo Polyx Tint is well suited to solid oak internal door finishing as it highlights the natural wood grain and gives them a warm and elegant finish.

This White finish gives solid oak wood work a white washed look, also known as a light beechwood finish. This product will give excellent coverage to your woodwork giving 30m²/L with one coat. Dust-dry after 24hrs. After thoroughly drying, you must only use an additional coat of the same tint as a top coat to prevent yellowing. Using a Polyx clear coat will poorly affect the white tint finish and create a ‘creamy’ look.

Osmo Polyx Oil Light Grey Tint is a great treatment for internal solid oak doors, wooden flooring and furniture. With a proven reputation, Osmo oils provide the highest level of protection and wood appearance enhancement. Osmo Polyx Tint is well suited to solid oak internal door finishing as it highlights the natural wood grain and gives them a warm and elegant finish.

This Graphite finish is a light grey wood tint that will enhance the natural grain pattern in your woodwork. The shade has a slightly grey tint to it, but generally maintains the original wood effect. This product will give excellent coverage to your woodwork giving 30m²/L with one coat. Dust-dry after 24hrs. After thoroughly drying, carry out a top coat with a clear Osmo Polyx®-Oil.

Osmo Polyx Oil is incredibly easy to apply and hard wearing, meaning that you can apply this oil quickly, to achieve protection against everyday household spills. The oil is resistant to most liquids such as beer, tea, coffee, juice and even saliva! The oil is micro-porous and will absorb into all the tiny cracks in the wood and will even enhance the grain. This clear gloss finish gives your internal solid oak doors the shine the deserve! Whilst not for everyone, this glossy finish is guaranteed to catch your eye.

We recommend this oil to our customers as one of the best treatment for their internal solid oak doors, but it is also a great choice for many other timber items such as wooden flooring and furniture!

Each litre tin will cover approx. 8 square metres with two coats and depending on useage will look great for several years, after which it can simply be re-applied. All the ingredients are European Pharmascopoeia compliant, ensuring that they are benzene free and contain only de-aromatised white spirit. this means the product is safe and suitable for use on children's toys, so you don't need to worry about germs!

Application

Oswax is ready to use - you don't need to thin it, simply stir it well.

Apply the 1st coat thinly, thoroughly and evenly along the wood grain, removing any surplus immediately. Allow this coat to dry for at least 8-10 hours ensuring good ventilation.

Apply the 2nd coat as you did the first - this coat will flow much easier than the first. Again allow 8-10 hours for drying and ventilate well.

When the door is thoroughly dry, you may buff or polish by hand or with a machine.

Clean your brushes or rollers using white spirit or benzene-free brush cleaner.

This Osmo Polyx Oil Effect Raw is a fantastic way to treat your solid oak internal doors, without altering the colour of the timber much at all. Polyx oil is extremely hardwearing and durable, enhancing the protection of your doors and furniture from marks and scratches.

Dry time: 24 hrs, remove white pigments from surface before leaving to dry

Coverage: 30m²/L with one coat

Recommended amount of coats: 2 coats (or 1, plus top coat of Polyx®-Oil Original)

Application

Apply with a brush or roller

Oswax is ready to use - you don't need to thin it, simply stir it well.

Apply the 1st coat thinly, thoroughly and evenly along the wood grain, removing any surplus immediately. Allow this coat to dry for at least 24 hours ensuring good ventilation.

Apply the 2nd coat as you did the first - this coat will flow much easier than the first. Again allow 24 hours for drying and ventilate well.

When the door is thoroughly dry, you may buff or polish by hand or with a machine.

Clean your brushes or rollers using white spirit or benzene-free brush cleaner.

Osmo Polyx Oil is the number 1 product that we recommend to our customers when they are looking for a protective oil for their new solid oak internal doors. The product has the same effect on old wooden doors too, giving them another chance to impress! The product is micro-porous, meaning it will soak right into the grain of the wood and enhance it! Even with a clear oil, the satin finish can add a subtle contemporary touch to your woodwork.

The oil is incredibly easy to apply. Simply get a lint-free rag or paintbrush, and glide the oil over the timber, 2 coats should do it! Depending on how thick you apply the oil, a 1L tin of oil should cover approx. 8 square metres with 2 coats. Applying this oil will make your doors and woodwork resistant to household liquids, such as water, tea, coffee, wine and beer, so you don't have to worry about life's little spills.

You'll also be pleased to know it is thoroughly tested and is European Pharmascopoeia compliant, meaning that it only used de-aromatised white spirit in the ingredients, along with ensuring they are benzene free.

Application

This product is not suitable for veneer doors.

Oswax is ready to use - you don't need to thin it, simply stir it well.

Apply the 1st coat thinly, thoroughly and evenly along the wood grain, removing any surplus immediately. Allow this coat to dry for at least 4-6 hours ensuring good ventilation.

Apply the 2nd coat as you did the first - this coat will flow much easier than the first. Again allow 4-6 hours for drying and ventilate well.

When the door is thoroughly dry, you may buff or polish by hand or with a machine.

Clean your brushes or rollers using white spirit or benzene-free brush cleaner.

This Osmo Polyx Oil in Clear Matt is the perfect choice for wood products! We strongly recommend the use of this oil on new internal solid oak doors as the best method of protection for your doors. It can also be used on our solid oak skirting and architrave or any other timber accessories required.

This oil is incredibly hard-wearing, micro-porous (breathable) and a water repellent surface treatment. It also protects your wood from other household liquids such and tea, coffee, wine and juice, so you don't have to worry about spills ruining your woodwork.

Each litre tin will cover approx. 8 square metres with two coats and depending on useage will look great for several years, after which it can simply be re-applied. All the ingredients are European Pharmascopoeia compliant, ensuring that they are benzene free and contain only de-aromatised white spirit, making them safe for use on children's toys.

Application

Oswax is ready to use - you don't need to thin it, simply stir it well.

Apply the 1st coat thinly, thoroughly and evenly along the wood grain, removing any surplus immediately. Allow this coat to dry for at least 8-10 hours ensuring good ventilation.

Apply the 2nd coat as you did the first - this coat will flow much easier than the first. Again allow 8-10 hours for drying and ventilate well.

When the door is thoroughly dry, you may buff or polish by hand or with a machine.

Clean your brushes or rollers using white spirit or benzene-free brush cleaner.

eaner.