Fitting an oak internal door can transform the interior of your home, giving it a fresh and elegant feel. Follow this step-by-step guide to ensure a smooth and successful installation. We've laid out the steps in an easy-to-follow numbered format.
Preparing for Installation
Step 1: Measure the Door Opening
Check Dimensions: Measure the height, width, and depth of your door opening before purchasing the door to ensure you choose the right size.
Verify Measurements: It's crucial to double-check your measurements to avoid any issues during installation.
Step 2: Remove the Existing Door
Detach Hinges: Use a screwdriver to remove the hinges from the existing door.
Ease the Door Out: Gently tap the old door out of its frame using a hammer.
Fitting the New Oak Door
Step 3: Trim and Sand the New Door
Adjust Size: If necessary, trim your new oak door to fit. Ensure there's a 2-3mm gap around the frame. A hand planer works well for this task.
Smooth Edges: Use sandpaper to sand the edges of the door, ensuring a clean, even fit.
Tool Required
Purpose
Screwdriver
To detach hinges
Hammer
To remove the old door
Hand planer
To trim the new door
Sandpaper
To smooth edges
Step 4: Install the Hinges
Placement: Position the top hinge about 7 inches from the top of the door and the bottom hinge 11 inches from the bottom.
Chisel Out: Carefully chisel out the marked areas so the hinges sit flush against the door.
Step 5: Set the Door in Frame
Support the Door: Use books or magazines to hold the door at the right height.
Mark Hinge Spots: Mark on the frame where the hinges will attach.
Step 6: Secure Hinges and Attach Hardware
Attach Hinges: Screw the hinges into the door frame, ensuring they are flush and that the door swings freely.
Install Hardware: Fit the door latch and handles.
Step 7: Conduct Final Checks
Attach Hinges: Screw the hinges into the door frame, ensuring they are flush and that the door swings freely.
Install Hardware: Fit the door latch and handles.
Installation Tips
Take Your Time: Rushing can lead to errors. Take it slow and follow each step carefully.
Prepare Tools: Gather all your tools beforehand to streamline the installation process.
By following these steps, you can successfully fit an oak internal door in your home, enhancing its overall appearance and functionality.
