Solid Oak External Door Frame fit 80x32 inch

Manufactured using laminated sections of Solid European Oak, this range of door frames is fully reversible for inwards out outwards opening doors. Will suit door thickness from 50-44mm.

Build to a high standard featuring mortise and tenon joints and pre machined to fit a standard weather seal (Aquamac 21) which is commonly available from hardware shops.

Total profile section of frame is approx 90 x 50mm.

As an approximate giude (based on total outside dimension) If you are selecting a frame to fit an existing hole in your wall please allow the door height +85mm height, door width +70mm. These are absolute minimum sizes and don't allow anything for fitting, please check with your builder.

ie, if you have a door size of 1981mm x 838mm high, then the hole will need to be bigger than 2066 high, 908mm wide

Please note: when purchasing an external door and frame of the same size, final fitting will need to be completed on site